Table of Contents
Advertisement
Changing the GPRS
connection code
If the mobile phone operator requires a set-
ting change for the GPRS connection, you
can do it in the menu ADV. OPTIONS.
?
To change the GPRS connection code
manually:
Move to the GPRS CODE menu and
press SRC/OK or
GPRS should appear on the display with
a list of digits (1, 2, 3, 4, 5, 6, 7, 8,
9), DEFAULT and DISABLE. To select a
new code for the GPRS connection, press
N or O until the desired option ap-
pears, then press SRC/OK or
/MENU. To choose to keep the de-
ß
fault value, select DEFAULT To disable
the connection code, select DISABLE
After having reset the GPRS connection
code, the system will display the mes-
sage GPRS CODE SET.
54
}
To set the GPRS connection code using
voice interaction:
Press
"Connection code".
The system will reply with "The current
GPRS connection code is" and the cur-
rent value. To change it, say a number
from 1 to 9 or say "Default". To disable
/MENU.
it, say "Disable". To change the code,
ß
say a number from 1 to 9 or say "De-
fault". To disable the code, say "Dis-
able". (In the previous sentence, the cur-
rent value referred to is the value set by
the GPRS connection code, at the time
when it was used).
After having set the new connection
code, the system responds with "The
connection code is the new value" (In
the previous sentence, new value is the
new value set for the GPRS connection).
'
and say "Settings" and then
EXIT SETTINGS MENU
At the end of each operation, you can exit
from the settings menu as follows.
?
To manually exit from the SETTINGS
menu:
Select the EXIT option and then press
SRC/OK or
/MENU.
ß
}
Or, with voice interaction:
Press
and say "Exit".
'
Advertisement
Table of Contents
