Table of Contents
Advertisement
Problem
The display shows:
NO PLAYLISTS or Blue&Me™ says:
"No playlists found"
The display shows:
INVALID
Indication on the display:
EMPTY PLAYLIST or
Blue&Me™ says:
"Empty playlist ."
Display shows:
BAD MEDIA
Sound system display shows:
MEDIAPLAYER without USB device
connected to the USB port
on the vehicle
Probable cause
You have attempted to play a playlist,
but there are none on the connected USB
device
The playlist is damaged or invalid
❍ The playlist does not contain
multimedia files
❍ The . wpl file is too large for the
Blue&Me™ memory
❍ The playlist does not contain
multimedia file references that are
found on your USB device
The digital audio is damaged or invalid
The USB device was removed from the
USB port on the vehicle when the igni-
tion key was turned to STOP
Possible solution
Create a playlist on your computer using your multimedia
file management software,
and add it to your USB device
❍ Make sure that the playlist is in . wpl format.
❍ Create the playlist again following the
instructions in the CREATING A PLAYLIST FOR
Blue&Me™ chapter under SUGGESTIONS.
❍ If the problem persists, delete the playlist from
your USB device.
❍ Delete the playlist from your USB
device or insert the multimedia files
in the playlist, using your
multimedia file management software.
❍ Reduce the number of songs in the
playlist by using your multimedia file management
software.
If the digital audio is damaged, delete it from
your USB device
❍ Press the SRC/OK button or the dedicated
FM
, AM, MEDIA buttons on the front panel
AS
of the radio to change the active audio source.
❍ With the ignition key in MAR position, insert and then
remove the USB device from the USB port in the car.
❍ To avoid the MEDIAPLAYER without USB device
message, we suggest that you always
extract the device with the ignition key turned to MAR,
or that you stop playback (with the voice command
STOP) before you remove the USB
device from the vehicle's USB port.
69
Advertisement
Table of Contents
