Advertisement
Quick Links
Description:
Industrial Grade Unmanaged 2-port 10/100/1000Base-TX (PoE+) + 1000Base-FX SFP
Ethernet Switch
Overview:
ET2212Pp-S-DR is a DIN rail type media converter that supports external SFP. It is a
industrial grade product whose operating temperature range is -10℃to 60℃ . ET2212Pp-S-DR
supports 10/100/1000M Ethernet port and 1000M SFP port. The Ethernet port supports both half-
duplex and full-duplex mode. Users can use different type of SFP modules (single-mode/multi-mode
fiber, 1/2 core) as needed.
Package Content
⚫
Unmanaged PoE Switch x 1
⚫
Quick Start Guide x 1
⚫
Din Rail mount bracket x 1
◎
Keep power off during installation
◎
use Antistatic Wrist Strap correctly
◎
Make sure using correct power supply, voltage must match
◎
Make sure enough power supply from PSU that will not overload
◎
Double check the wiring ( +/- ) is correct.
◎
Keep installation dry and clean.
◎
Do not open the chassis
Quick Installation Guide
ET2212Pp-S-DR
Read Before Install
Quick Installation Guide
ET2212Pp-S-DR/ version 2.3
OT Systems Ltd. | www.ot-systems.com
Advertisement
Related Manuals for OTS ET2212Pp-S-DR
Summary of Contents for OTS ET2212Pp-S-DR
- Page 1 Ethernet Switch Overview: ET2212Pp-S-DR is a DIN rail type media converter that supports external SFP. It is a industrial grade product whose operating temperature range is -10℃to 60℃ . ET2212Pp-S-DR supports 10/100/1000M Ethernet port and 1000M SFP port. The Ethernet port supports both half- duplex and full-duplex mode.
- Page 2 Earthing screw, used for earthing equipment. ET2212Pp-S-DR Front panel: The yellow light on the port is the LINK light, which is on when the connection is established and the data transmission is flashing. The green light is PoE light, which is only on when the switch port is supplying power to the PD devices.
- Page 3 Quick Installation Guide ET2212Pp-S-DR/ version 2.3 Note: "Tx ±" refers to sent data ±, "Rx ±" refers to received data ±, and "-" refers to unused data. LED Indicator LED indicator Status Definition Red LED on Power supplying in normal...
- Page 4 Quick Installation Guide ET2212Pp-S-DR/ version 2.3 ⚫ Din rail installation The first step is to check the grounding and stability of the guide rail: the guide rail slot of the switch is clamped into the guide rail; The second step: from the center to both sides of the guide rail positioning screws in order.
Need help?
Do you have a question about the ET2212Pp-S-DR and is the answer not in the manual?
Questions and answers