Verifying The Kit Contents; Unpacking The Kit - National Instruments NI REM-11115 Getting Started Manual

Indoor use only.
Note Refer to the device datasheet on

Verifying the Kit Contents

Verify that the following items are included in the REM-11115 kit.
1. NI REM-11115
2. Bus connector

Unpacking the Kit

Caution
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Note
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Figure 1. REM-11115 Kit Contents
1
To prevent electrostatic discharge (ESD) from damaging the device,
Never touch the exposed pins of connectors.
Do not install a device if it appears damaged in any way.
ni.com/manuals
2 3
3. Supply voltage connector
4. Spring-terminal block (x2)
REM-11115 Getting Started Guide | © National Instruments | 3
for complete specifications.
4