Table of Contents
Advertisement
Verifying the Kit Contents
Verify that the following items are included in the REM-11152 kit.
1. NI REM-11152
2. Bus connector
Unpacking the Kit
Caution
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Note
3.
Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Figure 1. REM-11152 Kit Contents
1
To prevent electrostatic discharge (ESD) from damaging the device,
Never touch the exposed pins of connectors.
Do not install a device if it appears damaged in any way.
2
3
3. Supply voltage connector
4. Spring-terminal block (x8)
REM-11152 Getting Started Guide | © National Instruments | 3
4
Advertisement
Table of Contents
