Nortek VentilAire III Installation Instructions

VentilAire™ III, IV, & V Whole-House Fresh Air Supply System
INSTALLATION INSTRUCTIONS
Sloped Roof Kit
Metal
Clamps
(X2)
"Kits conform to H.U.D. Manufactured Home Construction and Safety Standard for ventilation, paragraph 3280.710. Effective July 12,2021.
It is your responsibility to know this product better than your customer. This includes being able to install the product according
to strict safety guidelines and instructing the customer on how to operate and maintain the equipment for the life of the product.
Safety should always be the deciding factor when installing this product and using common sense plays an important role as
well. Pay attention to all safety warnings and any other special notes highlighted in the manual. Improper installation of the
unit or failure to follow safety warnings could result in serious injury, death, or property damage.
These instructions are primarily intended to assist qualified individuals experienced in the proper installation of this appliance.
Some local codes require licensed installation/service personnel for this type of equipment. Please read all instructions carefully
before starting the installation. Return these instructions to the customer's package for future reference.
DO NOT DESTROY. PLEASE READ CAREFULLY & KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
Plastic
Clamps
(X2)
Sheet Metal Screw
For Optional Mounting
Location
IMPORTANT
ATTENTION INSTALLERS:
5" X 11' Class I
Insulated Flexible Duct
Ceiling Ring
Plastic Inlet
Fitting w
Snap Fits