Page 1
® UV422 Series INSTRUCTIONS sharkclean.com 1-800-798-7398...
Page 2
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark Rocket Ultra-Light Upright. If you have any questions, please call the customer service line at 1-800-798-7398.
IMPORTANT SAFETY INSTRUCTIONS FOR HOUSEHOLD USE ONLY WARNING To reduce the risk of injury, fire, electric shock, and property damage resulting from improper use of the appliance, carefully observe the following instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.
Page 5
35 DO NOT immerse vacuum cleaner in water face and body. or other liquids. 25 Only use Shark -brand filters and ® 36 Use extra care when cleaning on stairs. accessories (failure to do so will void the warranty).
GETTING TO KNOW YOUR SHARK ROCKET ULTRA-LIGHT UPRIGHT ® ® WELCOME! Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all in here.
Page 7
Wand Release Wand Release Wand Release s h a r kc l e a n . c o m...
ASSEMBLING YOUR VACUUM DID YOU KNOW? The motorized floor nozzle and STEP 1 handheld vacuum have LED lights that illuminate the floor surface being cleaned. The lights turn on automatically in either speed setting. CLICK Insert the wand into the motorized floor nozzle connector until you hear a click.
Page 9
STEP 2 STEP 3 CLICK 2 Insert the handheld vacuum into the top of 3 This vacuum comes with a detachable the wand until you hear a click. clip to store up to 2 accessories on board. Snap clip onto the wand. Store one accessory on top holder and one accessory on bottom holder.
USING THE MOTORIZED FLOOR NOZZLE WARNING: This vacuum does not stand up on its own, so when taking a break from cleaning, rest it against a piece of furniture or a wall, or lay it flat on the floor. Using for an application where the unit lacks stability may result in personal...
CHOOSING THE APPROPRIATE SETTING The Rocket Ultra-Light has a 2-speed Power slider switch on the handle. Slide the Power ® switch to appropriate speed setting (I or II) and start cleaning. Bare Floor, Area Rugs (I) – The brushroll spins slowly to clean bare floors and delicate area rugs.
Slide the power switch to either setting to clean hard floors. Do not use to clean damp floors or wet/sticky messes. Use only pads provided by Shark. 1-800-798-7398...
USING YOUR VACUUM IN ABOVE-FLOOR MODE STEP 1 STEP 2 STEP 1 STEP 2 Wand Release UNLESS OTHERWISE SPECIFIED: UNLESS OTHERWISE SPECIFIED: NAME DATE NAME DATE DRAWN DIMENSIONS ARE IN INCHES DRAWN DIMENSIONS ARE IN INCHES TOLERANCES: TOLERANCES: TITLE: TITLE: CHECKED CHECKED FRACTIONAL...
STORAGE TIP: If your unit came with an accessory bag, OPTION 1 you can hang the bag on the wall mount with the vacuum. TIP: Be sure to use the Handheld plastic anchors provided Vacuum Catch when mounting into drywall; alternatively you may place screws directly into a stud.
Page 15
OPTION 2 2 Use the wall mount that is included. Drill two 5/16" holes and insert plastic anchors provided into the wall. Using a Philips head screwdriver, screw the wall mount into the plastic anchors. Hook the catch on the bottom of the handheld vacuum onto wall mount. s h a r kc l e a n .
ACCESSORIES The top flap of your box shows 12" Crevice Tool Pet/Upholstery Tool the select accessories that are Clean in between Perfect for grabbing pet included with your model. tight spaces or reach hair and lint from furniture baseboards and ceilings and other upholstered with this slim crevice tool.
MAINTAINING YOUR VACUUM WARNING: Hand wash filters with STEP 1 water only to prevent damage from cleaning chemicals. Allow ALL filters to dry completely before replacing in the vacuum to prevent liquid from being drawn into electric parts. CAUTION: Turn power off and unplug before servicing.
STEP 2 Monthly Pre-Motor filters Foam Felt Empty Post-Motor filter CLEANING THE FILTERS Hold dust cup over a trash bin and press Access the Pre-Motor foam and felt the Empty button on the front of the dust filters by lifting the latch on the top of the cup.
MAINTAINING YOUR VACUUM WARNING: Do not cut anything but the hair, fibers or string that is on the brushroll. TIP: Ensure the bottom of the floor nozzle is completely sealed and locked before using. TIP: You do not need any tools to open the floor nozzle—just a coin.
Page 21
STEP 1 STEP 3 STEP 2 STEP 4 BOTTOM OF FLOOR NOZZLE Use a coin to unlock the three locks on Remove any string, carpet fibers, or the bottom of the floor nozzle. hair that may be wrapped around the brushroll.
TROUBLESHOOTING GUIDE WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before servicing. Vacuum is not picking up debris. No suction or light suction. (Refer to Maintenance section for more information.) • Check filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the filters before reinserting in the vacuum.
FIVE (5) YEAR LIMITED WARRANTY The 5-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable. SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 5 years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in this instruction manual, subject to the following conditions and exclusions.
Need help?
Do you have a question about the Rocket UV422 Series and is the answer not in the manual?
Questions and answers