Advertisement
4. Lower the side racks carefully and gently place the retaining wire underneath the lock stud.
Do not lower the side racks until the prongs are fully inserted into the slots so that you do
not chip the enamel.
Changing the Oven Light Bulbs
The oven is illuminated by 12 volt / 20 watt halogen bulbs. These have a very long life, but if you should need to replace
one, use only a replacement bulb purchased from your nearest Fisher & Paykel dealer and follow these steps:
1. Allow the oven to cool and then turn it off at the wall.
2. Take out the shelves and side racks (see 'Removing & Replacing the sliding shelves and side racks) and use a
small flat-head screwdriver to twist and lift the retainer clip at the top of the glass light cover while holding the
glass to prevent it falling. The clip pivots counter-clockwise (see diagram).
3. Carefully lift the glass cover out of the lower support and pull out the faulty bulb.
4. Holding the replacement bulb in a soft cloth or tissue (touching the bulb will reduce its life span), insert the new
bulb.
5. Reposition the glass cover and twist the top clip back in place. The procedure is the same for the light in the
roof of the oven cavity.
https://producthelp.fisherpaykel.com/Manuals/Oven_Manuals/User_Guides/591008C_Wall_Oven/09_Care_and_Cleaning
Updated: Sun, 09 Apr 2023 00:13:22 GMT
Powered by
4
Advertisement
