Samsung SHP-DP920 User And Reference Manual page 7

Emergency
(0x0A)

Configuration (V1)
Name Parameter
Number
Security Function 0x01
Privacy Mode 0x02
Registered User 0x03
ID
Platform 0x0A
1)
This value can be used when the device is connected with platform of Samsung SDS.
This function is not related to Z-Wave CC.
- 0x02 : Command for disable which is set by platform of Samsung SDS.
After setting, if you try to get value of Security Function , '0x00' will be reported.
- 0x03 : Command for enable which is set by platform of Samsung SDS.
After setting, if you try to get value of Security Function, '0x01' will be reported.
- 0x04 : 'Request for Enable' command which is reported by Doorlock. This cannot be set.
(8th function in manual)
- 0x05 : If the request for 'Request for Enable' command is failed in platform,
this will be set by platform of Samsung SDS.
Motion Detection, Unknown Location
(0x08)
Contact Police (0x01)
Contact Fire Service (0x02)
Size Value
1byte 0x00
0x01
0x02
0x03
0x04
0x05
1byte 0x00
0x01
1byte 1 ~130
1byte 0x00
0x01
Description
Disable (Default)
Enable
1)
System Disable
1)
System Enable
1)
Request for Enable
1)
Fail
Disable (Default)
Enable
The number of registered user codes.
Common (Default)
3)
Samsung SDS
2)