Table of Contents
Advertisement
22
Connecting
En
4 Fix the upper cabinet and the lower cabinet
from the backside of the speaker using the
two screws (M4 x 12).
2
Caution
Be careful not to tighten screws excessively.
If excessive force is used to tighten screws, the
threads of screw and or nut may be damaged. Use
a middle-sized manual screwdriver during assembly.
Do not use power screwdrivers or oversized
screwdrivers that may exert excessive force on the
screws and nuts. Confirm that no foreign matter
is stuck to the base or the lower cabinet during
assembly. If the unit is assembled with foreign matter
stuck between the base and lower cabinet, the unit
may not be assembled securely, resulting in tipping
or falling.
Do not stand on the speaker stand base of the tall
speaker to push or swing the speaker. The speaker
may fall and break, or someone may be in ured.
Pay special attention to children.
.
Wall mounting the speaker for
MCS-838, MCS-737
The center speaker have a mounting hole
which can be used to mount the speaker on
the wall.
Before mounting
Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling.
Make sure that the wall you intend to mount
the speakers on is strong enough to support
them. Do not mount on plywood or soft surface
walls.
Mounting screws are not supplied. Use screws
suitable for the wall material and support the
weight of the speaker.
Caution
If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
Pioneer is not responsible for any accidents or
damage that result from improper installation.
3.5 mm
7.5 mm
Mounting screw
(not supplied)
3 mm to 4 mm
Advertisement
Table of Contents
