Table of Contents
Advertisement
6. How to enter the security code.
1 Select the security code section using
/ / / and press ENTER to start the
software keyboard.
2 Use / / / to select characters and
items, and then press ENTER to input.
3 Select [abc], [ABC], or [!@#$] using /
/ / to switch to lower case characters,
upper case characters, or symbols.
4 Finish entering the security code by
selecting [Enter] using / / / and
pressing ENTER.
7. Select [Next] using / / / and press
ENTER. If it connects success, it will display
connection success and IP is obtained.
8. Pressing ENTER ends [Wireless Setting].
Note
WEP security mode generally have 4 keys
available on an access point or wireless
router s setting. If your access point or wireless
router use WEP security, enter the security
code of the key No.1 to connect on your home
network.
An Access Point is a device that allows you to
connect to your home network wirelessly.
[Scan] – The player scans the all available
access points or wireless routers within
range and display them as a list.
[Manual] – our access point may not
be broadcasting its access point name
(SSID). Check your router settings through
your computer and either set your router
to broadcast SSID, or manually enter the
access point name (SSID) in [Manual].
[Auto] – If your access point or wireless
router that supports the Push Button
Configuration method, select this option
and press the Push Button on your access
point or wireless router within 120 counts.
ou do not need to know the access point
name (SSID) and security code of your
access point or wireless router.
Note
If there is no DHCP server on the network and
you want to set the IP address manually, Please
refer to Setting the IP address (Page 71).
Connecting
35
En
2
Advertisement
Table of Contents
