Connecting The Cord; Wall Mounting - Pioneer HTZ-424DVD Operating Instructions Manual

18 Installation

Connecting the cord

1. Attach one end of the supplied speaker
cord to the rear of the each speaker.
Connect the wire with the colored
marker to the red (+) terminal; the plain
wire to the black (–) terminal. Press
down the spring-loaded tab and insert
the wire, as shown below. Release the
tab to secure the wire.
Red (+)
Black (–)
3
Red colored marker

Wall mounting

The surround speakers (HTZ‑222DVD only)
and the center speaker have a mounting
hole which can be used to mount the
speaker on the wall.
Before mounting
Remember that the speaker system is
heavy and that its weight could cause the
screws to work loose, or the wall material
to fail to support it, resulting in the speaker
falling. Make sure that the wall you intend
to mount the speakers on is strong enough
to support them. Do not mount on plywood
or soft surface walls.
Mounting screws are not supplied. Use
screws suitable for the wall material and
support the weight of the speaker.
CAUTION
• If you are unsure of the qualities and
strength of the wall, consult a professional
for advice.
• Pioneer is not responsible for any accidents
or damage that result from improper
installation.