Adjusting The Airflow Direction - Daikin FTXF20W2VMA Operation Manual

Basic Operation

Adjusting the Airflow Direction

NOTE
Notes on airflow direction setting
• The movable range of the flap varies according to the operation mode.
• The flap will stop at the upper position when the airflow rate is changed to low during
the up and down swing setting.
11
You can adjust the airflow direction to increase your comfort.
ATTENTION
• Always use a remote controller to adjust the angle of the flap.
- If you attempt to move the flap forcibly by hand when it is swinging, the mechanism may be damaged.
• Be careful when adjusting the louvres.
- Inside the air outlet, a fan is rotating at a high speed.
Auto swing
For up and down airflow direction
1. Press .
• " " appears on the LCD
• The flap (horizontal blade) will begin to swing.
2. If you want to stop the movement of the flap, press
again when the flap reaches the desired position.
Manual adjustment
Hold the knobs and move the louvres (vertical blades)
to the desired position.
• There are knobs in 2 places.
For right and left airflow direction
Movable range of the flap
FAN ONLY
Knobs
COOL / DRY
HEAT