Advertisement

SM001
USER MANUAL
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SM001 and is the answer not in the manual?

Questions and answers

Summary of Contents for FlySky SM001

  • Page 1 SM001 USER MANUAL USER MANUAL...
  • Page 2: Table Of Contents

    Contents 1.Introduction ................3 1.1 Simulator Overview ......................... 3 2.OperationGuide................ 4 2.1 Turning On/Off the Simulator ....................4 2.2 Simulator LED Introduction ....................4 2.3 Changing Stick Mode ....................... 4 2.4 Gimbal Assembly Swapping ....................5 2.5 Trim ............................6 2.6 Stick Calibration ........................
  • Page 3: Introduction

    1.Introduction This simulator includes 6-channel and 8-channel editions. It is compatible with FMS, XTR5.0, PhoenixRC, G7 and other simulator software. The simulator is also compatible with 32-bit or 64-bit XP, WIN10, and so on. It is adaptable to fixed-wing aircraft, helicopters, gliders and other models. The simulator supports gimbal assembly swapping. This simulator features good control precision of stick.
  • Page 4: OperationGuide

    SM001 2. Operation Guide 2.1 Turning On/Off the Simulator Connect the USB cable of the simulator to the USB port of PC or laptop to power on the simulator. To power it off, unplug the USB cable. 2.2 Simulator LED Introduction The red D1 LED indicates the communication status of the simulator.
  • Page 5: Gimbal Assembly Swapping

    simulator at the same time. At this time, the simulator enters the stick switching mode. Press the Middle button of the left trim button (Five-way Button) to switch the throttle mode cyclically. Different LED states correspond to different throttle modes. See the LED status table. Press the Middle button of the right trim button (Five-way Button) to exit the stick switching mode.
  • Page 6: Trim

    SM001 2.5 Trim The up, down, left and right buttons for the left and right trims can be used to adjust the trim value of aileron, elevation, throttle, and rudder. The trim step is 5 us within a range of -120 us to 120 us. The D2 LED flashes quickly once when the trim value is adjusted to the Neutral position.
  • Page 7: Specifications

    3. Specifications This section contains SM001 simulator specifications. Product Model SM001 APD, Aerofly, Reflex XTR 5.0, G3/G3.5/G4/G5/G6/ G7, PhoenixRC 2.0/3.0S/4.0M/5, Compatible Simulation Software FMS, etc. Compatible Models Helicopters, fixed-wing aircraft, gliders, 3D special aircraft, racing drones, etc. Number of Channels 6(8)...
  • Page 8: Certifications

    SM001 4. Certifications 4.1 DoC Declaration We declare that this device is in compliance with the essential repuirements and other relevant provisions of Directive 2014/30/EU. 4.2 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
  • Page 9 Release date: 2022-11-25 Manufacturer: ShenZhen FLYSKY Technology Co., Ltd. Address: 16F, Huafeng Building, No. 6006 Shennan Road, Futian District, Shenzhen, Guangdong, China...

Table of Contents

Save PDF