Table of Contents
Advertisement
Document type:
Title:
User's Manual (MUT)
Mod. V977 16 Channel I/O Register (Status A)
15 14 13 12 11 10 9
PATTERN BIT: read/write;
= 0: the module works as I/O REGISTER (default setting);
= 1: the module works as a MULTIHIT PATTERN UNIT;
GATE MASK: read/write;
= 1: the GATE sent via FRONT PANEL signal is masked (default setting);
= 0: the GATE sent via FRONT PANEL signal is enabled; incoming hits are accepted only
as the GATE is active.
OR MASK: read/write;
= 0: the OR and /OR FRONT PANEL outputs are enabled (default setting);
= 1: the OR and /OR FRONT PANEL outputs are masked.
4.20. Dummy16
(Base address + %002A read/write)
This register allows to perform 16 bit test accesses for test purposes.
Default setting is 0x5555.
4.21. Software reset
(Base address + %002E write only)
A dummy write access to this register allows to generate a single shot RESET of the
module, which restores the default conditions.
NPO:
00118/01:V977X.MUTX/01
8 7 6
5 4 3
Filename:
V977_REV1.DOC
Revision date:
27/08/2004
2
1
0
PATTERN
GATE MASK
OR MASK
Revision:
1
Number of pages:
Page:
21
20
Advertisement
Table of Contents
