Table of Contents
Advertisement
8
Tilt the paper feed conveyor at a slight
angle pointing downward and attach it
as shown in the diagram to the right.
9
Close the paper feed conveyor.
•
Push up the paper feed conveyor until it
clicks into place.
•
You are now finished attaching the paper
feed roller module and separation roller
module.
To continue, replace the retard roller
module
according
procedure. (The retard roller module is
located in the conveyor.)
10
Using your fingers, hold the conveyor
and pull it towards you to open it.
•
When the conveyor is pulled towards you,
the
click-stop
released.
to
the
following
mechanism
will
be
Replacing Consumable Roller Modules
Please attach the left side hook in the same way.
Retard roller module
Hook
Pin
Paper feed
conveyor
Document guide
Conveyor
55
Advertisement
Table of Contents
