Table of Contents
Advertisement
4
Place the documents on the hopper
with the side to be scanned facing up.
Then push them in the direction of the
arrow until they stop.
•
Place the documents on the hopper by
matching them with the left side of the
hopper as shown in the diagrams at the
right.
The amount of documents should not
exceed the limit mark on the document
guide. This may cause a paper jam or
skew.
•
For different sized documents, place
them with the top left ends facing the left
side of the hopper.
5
Adjust the document guide to the size
of the document to be scanned.
Adjust the exit document stopper to
the size of the document to be output.
Loading Documents on the ADF
Portrait
Landscape
Exit document stopper
Fill indicator
(Limit mark)
Document guide
35
Advertisement
Table of Contents
