Advertisement
Quick Links
Victor Pro Video Production Camera Cart
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Top Shelf
2 x Crossbars
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
A s s e m b l y M a n u a l
2 x Hinge Handle
Allen key L–Type (Size 4mm)
4 x Screws
All rights reserved.
statutes or in writing by the Publisher.
(CT-VCTR-PRO-32)
Lower Shelf
Carrying Handle
4 x Knobs
1
Advertisement
Related Manuals for PROAIM Victor Pro CT-VCTR-PRO-32
Summary of Contents for PROAIM Victor Pro CT-VCTR-PRO-32
- Page 1 Victor Pro Video Production Camera Cart (CT-VCTR-PRO-32) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Page 2 2 x Pneumatic Tires With 2 x Pneumatic Tires Without Break With Packing Pouch Break With Packing Pouch 4 x (31” Length) Rods With Packing Victor Pro Camera Cart Setup NOTE: Two peoples are needed to assemble the cart. • Firstly, open all 4 locks present on each side of the cart.
- Page 3 • Attach the unlocked tire (with break) with lower shelf’s dovetail bracket by sliding it, as shown in the image. • Secure the tire using the knob. • The cart would look like this after attaching both the tires (With break). NOTE: To keep the cart in static position, lock the wheels by pushing down the lever.
- Page 4 • The cart would look like this after attaching both the tires (non break). Rod Assembly • Loose all the 4 knobs of lower shelf’s corner hole and insert rod into it, as shown in image. • Now, tighten all the knobs to ensure proper attachment of all the rods.
- Page 5 • Now, properly screw the carrying handle using the Allen key. • Follow same steps for all screws. Top Shelf setup • Now, align and mount the upper shelf on top of the rods. • Tighten all the knobs of the upper shelf to properly secure it.
- Page 6 • Tighten the knobs of the crossbar to securely position it. • The crossbar would look like this after securing with clamps. Hinge Handle • Loosen the handle of the hinge handle to open its clamp. • Place the handle clamp on the rod and adjust the hinge handle accordingly.
- Page 7 YOUR PROAIM VICTOR PRO VIDEO PRODUCTION CAMERA CART ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.