Deye SUN-3K-G05-AU User Manual

Grid-connected pv inverter

Hide thumbs

Table of Contents

Quick Links

Download this manual

Grid-connected PV Inverter

SUN-3K-G05-AU

SUN-6K-G05-AU

SUN-9K-G05-AU

User Manual

SUN-4K-G05-AU

SUN-7K-G05-AU

SUN-10K-G05-AU

SUN-5K-G05-AU

SUN-8K-G05-AU

SUN-12K-G05-AU

Table of Contents

Need help?

Do you have a question about the SUN-3K-G05-AU and is the answer not in the manual?

Questions and answers

Summary of Contents for Deye SUN-3K-G05-AU

Page 1 Grid-connected PV Inverter SUN-3K-G05-AU SUN-4K-G05-AU SUN-5K-G05-AU SUN-6K-G05-AU SUN-7K-G05-AU SUN-8K-G05-AU SUN-9K-G05-AU SUN-10K-G05-AU SUN-12K-G05-AU User Manual...
Page 2 1. Introduction - 02 - ………………………………………………………… 1.1 Appearance Introduction - 02 - ………………………………………… 1.2 Parts list - 04 - ………………………………………………………… 2. Safety warnings and instructions - 05 - ……………………………………… 2.1 Safety signs - 05 - ………………………………………………………… 2.2 Safety instructions - 05 - …………………………………………………...
Page 3: About This Manual
Documents must be stored carefully and be available at all �mes. Contents may be periodically updated or revised due to product development. The informa�on in this manual is subject to change without no�ce.The latest manual can be acquired via service@deye.com.cn. Photovoltaic Grid-connected System...
Page 4: Introduc�On
1. Introduc�on 1.1 Appearance Introduc�on On-grid Inverter can convert solar panel DC power into AC power which can directly input to the grid. Its appearance is shown below.These models contain SUN-3K-G05-AU, SUN-4K-G05-AU, SUN-5K-G05-AU, SUN-6K-G05-AU, SUN-7K-G05-AU, SUN-8K-G05-AU, SUN-9K-G05-AU， SUN-10K-G05-AU, SUN-12K-G05-AU. The following is collec�vely referred to as “inverter”.
Page 5 RS232/485 RS485 RS485 DC SWITCH SUN-(3-10)K-G05-AU RS232/485 RS485 RS485 DC SWITCH SUN-12K-G05-AU 1: Inverter Indicators DC switch 7:RS485 Port 2: LCD display PV input with two MPPT 8:DRM Port 3: Func�on Bu�ons 6:WiFi Interface - 03 -...
Page 6: Parts List
1.2 Parts list Please check the following table, to see whether all the parts are included in the package： Moun�ng stainless steel Grid-�ed PV String Inverter Wall moun�ng bracket x1 screws M4×12 DC+/DC- Plug connectors Stainless steel an�-collision AC power connectors x1 including metal terminal bolt M6×60 x N pairs...
Page 7 2. Safety warnings and instruc�ons Improper use may result in poten�al electric shock hazards or burns. This manual contains important instruc�ons that should be followed during installa�on and maintenance. Please read these instruc�ons carefully before use and keep them for future reference. 2.1 Safety signs Safety symbols used in this manual, which highlight poten�al safety risks and important safety informa�on, are listed as follows:...
Page 8 Shock Hazard: When PV module is exposed to sunlight, the output will generate DC voltage. Prohibit touching to avoid shock hazard. Shock Hazard: While disconnect the input and output of the inverter for maintenance, please waits for at least 5 mins un�l the inverter discharge the remnant electricity. High Temperature Hazard: Local temperature of inverter may exceed 80℃...
Page 9 3. Opera�on Interface 3.1 Interface View Normal Alarm Pic 3.1 Front panel display 3.2 Status Indicator There are four LED status indicator lights in the front panel of the inverter. Please see table 3.1 for details. Indicator status Explanation Inverter detects DC input ●DC oﬀ...
Page 10 3.3 Bu�ons There are four keys in the front panel of the Inverter(from le� to right): Esc, Up, Down and Enter keys. The keypad is used for: ● Scrolling through the displayed op�ons (the Up and Down keys); ● Access to modify the adjustable se�ngs (the Esc and Enter keys). Down Enter 3.4 LCD Display...
Page 11 4. Product installa�on 4.1 Select installa�on loca�on To select a loca�on for the inverter, the following criteria should be considered: WARNING: Risk of ﬁre ● Do not install the inverter in areas containing highly ﬂammable materials or gases. ● Do not install the inverter in poten�ally explosive atmospheres. ●...
Page 12 ● Install on a wall or strong structure capable of bearing the weight. ● Install ver�cally with a maximum incline of +/-15°. If the mounted inverter is �lted to an angle greater than the maximum noted, heat dissipa�on can be inhibited, and may result in less than expected output power.
Page 13 ≥500mm ≥500m Pic 4.3 Installa�on Gap 4.2 Inverter Installa�on The inverter is designed according to the wall mounted type installa�on, please use the wall mounted (the brick wall of the expansion bolt) when installing. Anchoring Moun�ng bracket Stainless steel screws Inverter Pic 4.4 Inverter Installa�on - 11 -...
Page 14 Procedure shows below: 1. Locate on the appropriate wall according to the bolt posi�on on the moun�ng bracket, then mark the hole.On the brick wall, the installa�on must be suitable for the expansion bolt installa�on. Pic 4.5 Inverter hanging plate installa�on 2.
Page 15 5 Electrical Connec�on 5.1 DC input terminal connec�on 1. Switch the Grid Supply Main Switch(AC)OFF. 2. Switch the DC lsolator OFF. 3. Assemble PV input connector to the inverter. Warning: When using PV modules, please ensure the PV+ & PV- of solar panel is not connected to the system ground bar.
Page 16 The steps to assemble the DC connectors are listed as follows: a)Strip oﬀ the DC wire about 7mm, disassemble the connector cap nut (see picture 5.3). Pic 5.3 Disassemble the connector cap nut b) Crimping metal terminals with crimping pliers as shown in picture 5.4. Pic 5.4 Crimp the contact pin to the wire c) Insert the contact pin to the top part of the connector and screw up the cap nut to the top part of the connector.
Page 17 DC input current should be 20A. if exceeds, it may damage the inverter and it is not covered by Deye warranty. 5.2 AC input terminal connec�on Do not close the DC switch a�er the DC terminal is connected.Connect the AC terminal to the AC side of the inverter, the AC side is equipped with Three phase AC terminals that can be conveniently connected.
Page 18 The AC output connector is divided into three parts: matching socket, sleeve and sealing- sleeve, as shown in picture 5.7, the steps are as follows: Step 1: Remove the cable sealing ring and sleeve in sequence from the AC connector. Step 2: Use strippers to strip the protec�ve sheath and insula�on layer of the AC cable to the right length, as shown in Picture 5.8.
Page 19 Pic 5.9 AC Connector Hole Pa�ern Step 5: Set the sleeve and sealing ring in place. Step 6: Connect the terminals to the inverter as shown in picture 5.10. Pic 5.10 AC input connec�on - 17 -...
Page 20 5.3 The connec�on of the ground line Good grounding is good for resis�ng surge voltage shock and improving EMI perfor- mance.Therefore, before connec�ng AC, DC and communica�on cables, you need to ground the cable ﬁrstly. For a single system, just ground the PE cable. For mul�ple machine systems, all PE cables of the inverter need to be connected to the same grounding copper platoon to ensure the equipoten�al connec�on.
Page 21 In order to protect the inverter AC connec�on, it is recommended to install a circuit breaker to prevent overcurrent. See table 5.3 below. Rated output Rated output Current for protection Inverter voltage(V) current(A) device(A) SUN-3K-G05-AU SUN-4K-G05-AU SUN-5K-G05-AU SUN-6K-G05-AU SUN-7K-G05-AU 10.1 SUN-8K-G05-AU 11.6 SUN-9K-G05-AU SUN-10K-G05-AU 14.5...
Page 22: Startup And Shutdown
5.6 Installa�on of datalogger When the inverter is out of the factory, the installa�on loca�on of datalogger is sealed by a sealed plate as shown in Picture 5.13. When installing the datalogger, remove the sealing plate, replace it with the sealing plate with square hole in the accessories, and �ghten the screws. Insert the datalogger into the interface and ﬁx it with a screw.
Page 23 6.1 Start up the inverter When start up the single phase string inverter, should fellow below steps： 1. First switch on the AC breaker. 2. Turn on the DC switch of the PV module, and if the panel provides suﬃcient star�ng voltage and power, the inverter will start.
Page 24 6.4 DRM wiring diagram RS232/485 RS485 RS485 DC SWITCH SUN-(3-10)K-G05-AU RS232/485 RS485 RS485 DC SWITCH SUN-12K-G05-AU DRM1/5 DRM2/6 DRM3/7 DRM4/8 1 2 3 4 5 6 REF GEN/0 COM LOAD/0 - 22 -...
Page 25 7. Zero-export func�on via energy meter There're two kinds of energy meters for this series inverter. First type is Eastron SDM630-Modbus V2 which is able to measure the Max. 100A current directly. More details please refer to Pic 7.1 & 7.2. For the Eastron SDM630 MCT 40mA, it needs external CT to measure the current.
Page 26 1 2 3 4 5 6 7 8 Eastron (1,2,3,4) (5,6,7,8) B A G RS 485 RS 485 B RS 485 A Pic 7.1 Eastron meter Eastron SDM630-Modbus V2 Inverter RS232/485 RS485 RS485 DC SWITCH Solar Panel array SUN-12K-G05 RS232/485 RS485 RS485 DC SWITCH...
Page 27 9 1 0 11 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0 Eastron 15 16 17 18 19 20 1 2 3 4 Grid voltage Auxiliary Current inputs sampling power supply 1 4 1 3 1 2 RS 485 RS 485 A RS 485 B...
Page 28 Three-Phase Smart Meter (1,4,7,10) (3,6,9,10) RS 485 Pic 7.5 CHNT meter CHNT DTSU666 Inverter RS232/485 RS485 RS485 DC SWITCH Solar Panel array SUN-12K-G05 RS232/485 RS485 RS485 DC SWITCH SUN-(3-10)K-G05 AC Breaker RS 485 Male connector Family load L1 L2 L3 N VCC_5V 485_B RS 485...
Page 29 7.1 Mul�ple strings and parallel connec�on meters This applica�on is that when the string inverters work in parallel, there is only one power grid and one load, and only one meter can be connected to prevent reverse current, so only this many-to-one an�-reverse current connec�on can be connected. If there’s several inverters in a plant, also it can use 1pcs meter to realize zero export func�on.For example,if there’s 3pcs inverter in the system with 1pcs meter.We need to setup 1pcs inverter as the master and others setup as slaves.
Page 30 RANGE NAME DESCRIPTION AVG: Average power of three phase is zero exported. Exp_Mode AVG/MIN MIN: Phase with minimum load power is zero exported, while the other two phase may be in purchase mode. CT ra�o of power grid side meter when extern CT_Ra�o 1-1000 CT is applied.
Page 31 1 2 3 4 5 6 7 8 Eastron (1,2,3,4) (5,6,7,8) B A G RS 485 RS 485 B RS 485 A Pic 7.8 Eastron meter Eastron SDM630-Modbus V2 Grid Master(Mst) L1 L2 L3 N RS485 485_B 485_A VCC_5V 485_B RS 485 Female connector Slave2(Slv2)
Page 32 9 1 0 11 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0 Eastron 1 2 3 4 15 16 17 18 19 20 Grid voltage Auxiliary Current inputs sampling power supply 1 4 1 3 1 2 RS 485 RS 485 A RS 485 B...
Page 33 Three-Phase Smart Meter (1,4,7,10) (3,6,9,10) RS 485 Pic 7.12 CHNT meter CHNT DTSU666 Master(Mst) AC Breaker RS232/485 RS485 RS485 DC SWITCH Solar Panel array Slave1(Slv1) AC Breaker RS232/485 RS485 RS485 DC SWITCH Solar Panel array Slave2(Slv2) AC Breaker RS232/485 RS485 RS485 DC SWITCH Solar Panel array...
Page 34: Meter Power
7.2 Use of zero-export func�on When the connec�on is completed, the following steps should be refered to use this func�on: 1. Turn on the AC switch. 2. Turn on the DC switch, wai�ng for the inverter's LCD is turned on. 3.
Page 35 7.3 Notes while using zero export func�on For your safety and the opera�on of limiter func�on of the inverter, we put forward the following sugges�ons and precau�ons: Safety Hint: Under zero export mode we strongly recommend that the two PV arrays are formed by the same number of PV panels of the same size, which will make the inverter more responsive to limit the power.
Page 36 And then choose your system type as “Self-consump�on” Edit Plant Done Cancel Address : Basic Info YongJian g Road, Beilum,NingBo, 315806, China System Info Yield Info Coordinates : Owner Info Longitude 19.03 ” Latitude 36.11 ” Time Zone : Creation Time : 2020/04/08 (UTC+08:00) Beijing,Chongqing,Hong Kong,Urumqi System Info...
Page 37: General Opera�On
8. General Opera�on During normal opera�on, the LCD shows the current status of the inverter, including the current power, total genera�on, a bar chart of power opera�on and inverter ID,etc. Press the Up key and the Down key to see the current DC voltage, DC current, AC voltage, AC current,in- verter radiator temperature,so�ware version number and Wiﬁ...
Page 38 P1-P6 Vstart Q1-Q6 Vstop P1-P6 PF1-PF6 Pstart Pstop RmpTime Ac�veP PmpTime Q-Mode PtUsed V1-V6 Q1-Q6 VRated Q(%) ReactP Exp_Mode Fun- ISO AUTO CT_Ra�o 0 EASTRON Fun RCD ACREL FeedIn SelfCheck CHNT Shunt ShuntQTY Island Generator AUTO Meter G.CT EASTRON Setup G.MFR ACREL Limiter...
Page 39 INMETRO *Note: These parameters will be avaiable a�er the meter is EN50549 connected successfully. Otherwise, it won't show. EN50438 00 Australia A CUSTOM VDE_4105 00 Australia B 00 Australia C CEI_0_21 G98_G99 00 New Zealand NB/T 32004 GridStanderd Protect Param OverVolt Lv3-Lv1 Advanced Point 240.0V...
Page 40 8.1 The ini�al interface From the ini�al interface, you can check PV power, PV voltage, grid voltage, inverter ID, model and other infoma�on. Power: Power: State: Standby State: Com.Error Pic 8.2 The ini�al interface Press UP or Down, you can check inverter DC voltage, DC current, AC voltage, AC current and inverter temperature.
Page 41 ImpEp: Daily energy purchased from grid; ImpEp: 0.00KWh Total: Total energy purchased from grid. Total : 0.00KWh Pic 8.11 Electrical energy ExpEp: Daily energy sold to grid; ExpEp: 0.00KWh Total: Total energy sold to grid. Total : 0.00KWh Pic 8.12 Electrical energy 8.2 Submenus in the Main Menu There are ﬁve submenus in the Main Menu.
Page 42 8.2.3 ON/OFF se�ng ON / OFF << Turn ON << Setup Turn OFF Turn ON Turn OFF << Cancel << Cancel Pic 8.15 ON/OFF se�ng When the inverter is turned oﬀ, it stops working immediately, and go to standby mode and then will go to self-test program again.
Page 43 8.3 System param se�ng System Param includes �me set, language set, display set and factory reset. Time Set << Display Set Language Set Factory Reset << Factory Reset Set Restore << Pic 8.18 System Param 20200522 OK English << Polski 08:11:21 Cancel Pic 8.19 Time Bright Keep...
Page 44 8.4 Running param set Vref 0.0V ActiveP ReactP 0.0% << Q-Mode OFF << Fun RCD OFF << -1.000 Fun ISO OFF << SelfCheck Island OFF << Limiter Feed-in 0% << Meter MPPT Num WindTurbine << Pic 8.25 - 42 -...
Page 45 NAME DESCRIPTION RANGE Adjust the output ac�ve power in % 0-110% Ac�veP OFF/Q(P)/PF(P) Q-Mode Mul�ple reac�ve power control modes /Q(U)/PF/Q(%) Grid reference voltage for func�ons including 80-260V Vref Q(U),PF(P),P(U)etc. Adjust reac�ve power output in % -100%-+100% ReactP Power Fator -1-0.8~+0.8-1 Insula�on resistance detec�on ON/OFF Fun_ISO...
Page 46 Sunspec OFF << PassWord Sunspec OFF << Cancel << Pic 8.29 Warning: Password required-- only for access-authorized engineer. Un-authorized access may avoid the warranty. If the engineer does not know the password, please contact your distributor or Deye. - 44 -...
Page 47 NAME DESCRIPTION RANGE Arc-fault detec�on func�on ON/OFF/CLR Ac�ve power response to over- ON/OFF/HYS OF-Derate frequency Ac�ve power response to under- ON/OFF UF-Uprate frequency power response to grid voltage ON/OFF devia�on ON/OFF voltage ride through func�on LVRT ON/OFF HVRT voltage ride through func�on Hard/so�...
Page 48 Over-frequency Response This series inverter provides “over-frequency response” func�on. Long pressing the “OFD Mode” to enter the “over-frequency response” se�ng menu. OFDMode HYS <- OF-Derate ON <- OF-Derate OFF <- Tab. 11-4 Definition of Over- frequency Response Parameters Parameter Range Description Fstr 45HZ-65HZ...
Page 49 When the frequency exceeds : 51.5Hz, the inverter output should stop (ie 0 W). Fstop When the frequency is lower than : 51.5 Hz, the inverter will linearly increase the power Fstop output with a gradient of 100% Pmax/Hz un�l it reaches : 50.5 Hz.
Page 50 "Q(U)" Mode The reac�ve power output of the inverter varies in response to the grid voltage. "Q(P)" Mode The reactive power output by the inverter is controlled by the active power of the inverter. "PF(P)" Mode The PF is controlled by the active power of the inverter. “PU”...
Page 51 U/Vref (U1,P1) (U2,P2) (U3,P3) (U4,P4) P/Pn Pic 8.31 Ac�ve Power Regula�on Curve in PU Curve parameter Range descrption Value of P/Pn at point (P1,U1) on the PU mode 0%-110% Pn curve Grid voltage limit at point (P1,U1) on the PU mode 0% -150% Vref curve Value of P/Pn at point (P2,U2) on the PU mode...
Page 52 “Q(U)” Mode ActiveP Pstart 0.0% << QMode Q(U) <- Pstop 20.0% RmpTime 0.0% << PtUsed 0 << 0.0% 0.0% << 0.0% << 0.0% 0.0% 0.0% << 0.0% << 0.0% 0.0% 130.0% << 0.0% 30.0% Cancel << Pic 8.32 - 50 -...
Page 53 (U1,Q1) Upper Q/Pn lnd (U2,Q2) (U4,Q4) Grid Voltage (U3,Q3) (U5,Q5) Lower Q/Pn Cap (U6,Q6) Pic 8.33 Reac�ve Power Regula�on Curve in Q(U) Curve - 51 -...
Page 54 Parameter Range Description The QU mode starts when the active power Pstart 0%-130% Rate out power is greater than this value The QU mode stops when the active power Pstop 0%-130% Rate out power is less than this value Value of Q/Pn at point (U1,Q1) on the Q(U) -60% -60% Q/Pn mode curve Grid voltage limit at point (U1,Q1) on the...
Page 55 “Q(P)” Mode Upper Q/Pn lnd (P1,Q1) The reactive power output by the inverter is controlled by the active power of the inverter. P2(P2,Q2) P/Pn P4(P4,Q4) P3(P3,Q3) P5(P5,Q5) Lower P6(P6,Q6) Q/Pn Cap Pic 8.34 Reac�ve Power Regula�on Curve in Q(P) Mode ActiveP 20.0% 0.0% <<...
Page 56 Parameter Description Range Power value/Pn at point (P1,Q1) on the Q(P) mode 0%-100% Pn curve Reactive power value at point (P1,Q1) on the Q(P) -60% -60% Q/Pn mode curve Power value/Pn at point (P2,Q2) on the Q(P) mode 0%-100% Pn curve Reactive power value at point (P2,Q2) on the Q(P) -60% -60% Q/Pn...
Page 57 "PF(P)" Mode The output power factor is controlled by the active power of the inverter. Vstart 0.0% 0.0% Vstop 0.0% -1.000 << 0.0% 0.0% -1.000 << -1.000 << 0.0% 0.0% -1.000 << -1.000 << 0.0% RmpTime -1.000 << Cancel << PF lagging P1(P1,PF1) P2(P2,PF2)
Page 58 Parameter Range Description The PFP mode is enable when grid Vstart 0-150% Vref voltage is greater than Vstart The PFP mode is disable when grid voltage Vstop 0-150% Vref is less than Vstop Power value at point (PF1,P1) on the PF(P) 0-110% Pn Curve PF value at point (PF1,P1) on the PF(P)
Page 59 8.5 Protect Param Warning: Engineer Only. We will set the param depends on the safety requirements, so customers don't need to reset it. The password is same as 8.4 Running param GridStanderd << Back << Advanced PassWord Pic 8.36 Password INMETRO EN50438 EN50549...
Page 60 OverVolt OverVolt Point 240.0V << Delay 1000ms << OverVolt OverVolt Point 240.0V << Delay 1000ms << UnderVolt UnderVolt Point 235.0V << Delay 1000ms << UnderVolt UnderVolt Point 235.0V << Delay 1000ms << UnderVolt UnderVolt Point 235.0V << Delay 1000ms << OverFreq OverFreq Point...
Page 61 UnderFreq Lv2 UnderFreq Lv2 Point 48.00Hz << Delay 1000ms << UnderFreq Lv3 UnderFreq Lv3 Point 48.00Hz << Delay 1000ms << Reconnection Reconnection 0.0V << Vdown 0.0V << Reconnection Reconnection 0.00Hz << Fdown 0.00Hz << OV 10 Minutes OV 10 Minutes Enable OFF <<...
Page 62: Repair And Maintenance
9. Repair and Maintenance String type inverter doesn’t need regular maintenance. However,debris or dust will aﬀect heat sink’s thermal performance. It is be�er to clean it with a so� brush. If the surface is too dirty and aﬀect the reading of LCD and LED lamp, you can use wet cloth to clean it up. High Temperature Hazard: When the device is running, the local temperature is too high and the touch can cause burns.
Page 63 Check the solar panel output connec�on. Failure in reading memory (EEPROM). Restart the inverter if the Read the memory error fault s�ll exists, contact your installer or Deye service. Failure in wri�ng memory (EEPROM). Restart the inverter if the Write the memory error fault s�ll exists, contact your installer or Deye service.
Page 64 3. Check if the inverter FW version is suitable for the hardware. 4. Restart the inverter, if the error s�ll exists, please contact your installer or Deye service. DC leakage ﬂow fault Hardly appear the code. Never ever happened so far.
Page 65 1. Check AC current sensor and its circuit. AC over current(one cycle) 2. Restart the inverter, if the fault s�ll exists, contact your installer or Deye service. DC over current Hardly appear the code. Never ever happened so far. Check the AC voltage protec�on se�ng. And Check if the AC AC Line W,U over voltage cable is too thin.Check the voltage diﬀerence between LCD and...
Page 66 DC busbar voltage is too low then showing F56, maybe Loss of driver or need update ﬁrmware. 3. Restart the inverter, if the fault s�ll exists, contact your installer or Deye service. AC reverse irriga�on AC reverse irriga�on. AC grid U over current Hardly appear the code.
Page 67 11.Speciﬁca�on SUN-3K- SUN-4K- SUN-5K- SUN-6K- Model G05-AU G05-AU G05-AU G05-AU Input Side Max.DC Power(kW) Max.DC Input Voltage(V) 1000 Start-up DC Input Voltage(V) 350-850 MPPT Full Power Voltage Range[Vd.c.] MPPT Opera�ng Range(V) 120~850 Max.DC Input Current(A) 13+13 Max. Short Circuit Current (A) 19.5+19.5 Number of MPPT/Strings per MPPT MAX inverter backfeed current (A)
Page 68 General Data DC Connec�on VP-D4 AC Connec�on IP65 rated plug Display LCD1602 Interface RS485/RS232/Wiﬁ/LAN An�-islanding Protec�on Integrated (Ac�ve Frequency Shi�) - 66 -...
Page 69 SUN-7K SUN-8K SUN-9K SUN-10K SUN-12K Model -G05-AU -G05-AU -G05-AU -G05-AU -G05-AU Input Side Max.DC Power(kW) 10.4 11.7 15.6 Max.DC Input Voltage(V) 1000 Start-up DC Input Voltage(V) 250V MPPT Full Power Voltage Range[Vd.c.] 480V-850 MPPT Opera�ng Range(V) 120~850 200~850 Max.DC Input Current(A) 13+13 Max.
Page 70: Disposing Of The Inverter
General Data DC Connec�on VP-D4 AC Connec�on IP65 rated plug Display LCD1602 Interface RS485/RS232/Wiﬁ/LAN An�-islanding Protec�on Integrated (Ac�ve Frequency Shi�) 12.Package and transport inverter Usually placed inverter in the packing box with tape sealing, if the inverter cannot reoccupy, you can choose a cheap carton for packaging.
Page 71 Add: No.26-30, South Yongjiang Road, Beilun, 315806, Ningbo, China Tel: +86 (0) 574 8622 8957 Fax: +86 (0) 574 8622 8852 E-mail: service@deye.com.cn Web: www.deyeinverter.com...

This manual is also suitable for:

Sun-6k-g05-au Sun-9k-g05-au Sun-5k-g05-au Sun-8k-g05-au Sun-4k-g05-au Sun-7k-g05-au ... Show all

Deye SUN-3K-G05-AU User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Deye SUN-3K-G05-AU

Summary of Contents for Deye SUN-3K-G05-AU

This manual is also suitable for:

Table of Contents