Using Your Precision Processor Bowl - Ninja INTELLI-SENSE CT682SP Series Owner's Manual

USING YOUR PRECISION PROCESSOR® BOWL
IMPORTANT: Review all warnings on
pages 4–6 before proceeding.
TIP: If the blade assembly is not fully
seated, you will not be able to install
and lock the lid into position.
TIP: To learn more about the unit's
programs, refer to page 11.
NOTE: Pre-set programs have pauses
and changes in speed throughout
the cycle.
NOTE: DO NOT add ingredients before
installing the blade assembly.
NOTE: Please follow the same instructions
to install the Dough Blade Assembly.
NOTE: Smart Vessel Recognition can
detect which container is on the motor
base. Only the functions available for
a particular container will illuminate on
the touchscreen.
1 Place the unplugged motor base on a
clean, dry, and level surface such as a
countertop or table. Press downward on
the motor base to adhere the suction
cups to the work surface. Plug the motor
base into a wall outlet.
16 ninjakitchen.com
2 Lower the Precision Processor bowl onto
the motor base.
3 Rotate Precision Processor bowl
clockwise until it clicks into place.
4 Exercising care, grasp the Chopping Blade
Assembly by the top of the shaft and place
it onto the drive gear inside the bowl. Note
that the Chopping Blade Assembly will fit
loosely onto the drive gear.
5 Add ingredients to the bowl, making
sure not to exceed the MAX LIQUID and
MAX FILL lines.
6 Place lid on Precision Processor® Bowl,
with black line on tab aligned slightly to
the right of tab on front of bowl. Turn
lid clockwise to lock in place. When
properly locked, the white line on lid will
line up with the black line on bowl. When
the unit is connected to power and
the container is correctly locked onto
the motor base, press and hold Power
symbol to turn unit on. The available
program buttons will illuminate and the
unit will be ready for use.
7 If using a pre-set program, first select
the program that best suits your recipe.
The pre-set feature will automatically stop
the appliance at the end of the program.
To pause the unit at any time, press the
currently active program a second time.
Reference page 11 for program descriptions.
8 To remove the bowl from the motor
base, turn the bowl counterclockwise
and then lift it.
9 Remove the lid by pressing the release
button on the front tab, twisting the lid
counterclockwise, and lifting up. Always
remove the Chopping Blade Assembly
before emptying any of the ingredients in
the bowl. To remove the Chopping Blade
Assembly, carefully grasp it by the top of
the shaft and lift it out of the bowl.
10 Unplug the unit when finished. To release
the motor base, place your hands
underneath both sides of the motor base
and gently pull the unit up and towards
you. Refer to page 22 for storing
instructions.
ninjakitchen.com 17