Using Your Single-Serve Cup - Ninja INTELLI-SENSE CT682SP Series Owner's Manual

USING YOUR SINGLE-SERVE CUP

IMPORTANT: Review all warnings on
pages 4–6 before proceeding.
IMPORTANT: As a safety feature, if
the pitcher and lid are not properly
installed, the timer will display "- --"
and the motor will be disabled. If this
happens, repeat step 5. When the
pitcher and lid are properly installed, the
program buttons will illuminate steadily,
indicating the appliance is ready for use.
TIP: To learn more about the unit's
programs, refer to page 10.
NOTE: Pre-set programs have pauses
and changes in speed throughout
the cycle.
NOTE: Smart Vessel Recognition can
detect which container is on the motor
base. Only the functions available for
a particular container will illuminate on
the touchscreen.
14 ninjakitchen.com
1 Place the unplugged motor base on a
clean, dry, and level surface such as a
countertop or table. Press downward on
the motor base to adhere the suction
cups to the work surface. Plug the motor
base into a wall outlet.
2 Add ingredients to the Single-Serve Cup.
DO NOT add ingredients past the MAX
LIQUID line on the cup.
3 Install the Pro Extractor Blades®
Assembly onto the top of the cup. Twist
the lid clockwise until it's sealed tightly.
4 Turn the Single-Serve Cup upside down
and install onto the motor base. Align
the tabs on the cup with the slots on the
base, then twist until it clicks into place.
When the unit is connected to power and
the container is correctly locked onto
the motor base, press the Power symbol
to turn unit on. The available program
buttons will illuminate and the unit will be
ready for use.
5 If using a pre-set program, first select the
program that best suits your recipe. The
pre-set feature will automatically stop
the unit at the end of the program. To
pause the appliance at any time, press
the currently active program a second
time. Reference page 10 for program
descriptions.
6 To remove the cup from the motor base,
turn the cup counterclockwise and then
lift it.
7 Remove the Pro Extractor Blades®
Assembly by twisting the cap counter-
clockwise. Do not store blended contents
with Pro Extractor Blades Assembly
attached. Exercise care when handling the
blade assembly, as the blades are sharp.
8 Unplug the unit when finished. To release
the motor base, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you. Refer to page 22 for storing
instructions.
9 To enjoy your drink on the go, place the
Spout Lid onto the Single-Serve Cup and
twist lid clockwise until firmly sealed. For
storing ingredients in the cup, use only
the Spout Lid to cover
ninjakitchen.com 15