Assembly And Use For The Food Processor Bowl - Ninja BL770 30 Owner's Manual

Assembly and Use for the Food Processor Bowl

WARNING: Never leave the appliance unattended while in use.
CAUTION: Handle the blade assemblies with care, as the blades are very sharp.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
Fig. 3b
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Align and lower the Bowl onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the
"LOCK" symbol on the motor base.
3
Rotate the bowl clockwise to lock into place. You will
hear a click when the lock is engaged. (Fig. 2)
4
The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
5
Holding the desired blade by the top of the shaft, place
it onto the drive gear inside the bowl. Ensure that the
attachment is seated properly and is standing upright.
(Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
6 Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
9 1-877-646-5288
Fig. 2
Fig. 4
7
Holding the lid by the handle in the upright position,
place it on top of the bowl aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl's handle. (Fig. 5) Press the handle down until you
hear a click.
NOTE: The 64 oz. bowl is not intended for
blending drinks. Do not overfill.
NOTE: To add liquids during processing,
open the drizzle hole on the top of the
lid and pour the liquid slowly into the
mixture.
8
Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the bowl and lid are not installed correctly.
When the bowl and lid are installed properly, the
power button ( ) will be solid, indicating that the
appliance is ready for use.
Fig. 3a
Fig. 5