Assembling Your Auto-Spiralizer - Ninja INTELLI-SENSE CT682SP Series Owner's Manual

ASSEMBLING YOUR AUTO-SPIRALIZER®
IMPORTANT: Review all warnings on
pages 4–6 before proceeding.
IMPORTANT: As a safety feature, if the
Spiralizer Bowl and Feed Chute Lid are
not properly installed, the timer will display
"- --" and the motor will be disabled.
NOTE: To fit properly, the tabs on the
sides of the Blade Disc must align with the
gaps on the top of the Collecting Bowl.
NOTE: The Spiralizer accessory is
only intended for processing of fruit
and vegetables. Processing hard
ingredients such as cheese, meats, and
dried foods is not recommended.
18 ninjakitchen.com
1 Place the unplugged motor base on a
clean, dry, and level surface such as a
countertop or table. Press downward on
the motor base to adhere the suction
cups to the work surface. Plug the motor
base into a wall outlet.
2 Lower the Spiralizer Bowl onto the
motor base.
3 Rotate the Spiralizer Bowl clockwise
until it clicks into place.
4 Place the Collecting Bowl inside the
Spiralizer Bowl, aligning it over the
gear post.
5 Choose your Blade Disc, making sure to
handle it carefully.
6 Install the Blade Disc onto the top of the
Collecting Bowl. The rim of the Blade
Disc should sit flush against the top of
the bowl, and the tabs on the sides of
the Blade Discs must align with the slots
on the top of the Collecting Bowl.
7 Assemble the Feed Chute Lid on top
of the Spiralizer Bowl. Turn the lid
clockwise onto the Spiralizer Bowl,
aligning the gray tabs on the lid with
the front of the bowl. When the unit is
connected to power and the container
is correctly assembled onto the motor
base, press the Power symbol to turn
unit on. The GO button will illuminate,
indicating that the unit is ready for use.
ninjakitchen.com 19