Using The Single-Serve Cup - Ninja AMZ493BRN Owner's Manual

USING THE SINGLE-SERVE CUP

IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: Preset programs have pauses and
changes in speed throughout the cycle.
1 Plug in motor base and place on a
clean, dry, level surface such as a
countertop or table.
2 Add ingredients to the Single-Serve
Cup. DO NOT add ingredients past
the MAX LIQUID line on the cup.
3
Install the Pro Extractor Blades®
Assembly onto the top of the cup.
Twist the lid clockwise until it's sealed
tightly.
14 ninjakitchen.com
4 Turn the cup upside down and install
on the motor base. Align the tabs on
the cup with the slots on the base,
then rotate cup clockwise until it clicks
into place. Once the cup is locked in
place, the available program buttons
will illuminate and the unit will be
ready for use.
5a If using an Auto-IQ® program, the preset
feature will automatically stop at the end
of the program. To stop the program
at any time, press the currently active
program again.
5b If using START/STOP, once ingredients
have reached the desired consistency,
press START/STOP again and wait for
the unit to come to a complete stop.
6
To remove the cup from the motor
base, turn the cup counterclockwise
and then lift it.
7
Remove the Pro Extractor
Blades® Assembly by twisting
counterclockwise. DO NOT store
blended contents with Pro Extractor
Blades Assembly attached. Exercise
care when handling the blade
assembly, as the blades are sharp.
8
Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
9 To enjoy your drink on the go, place
the Spout Lid onto the Single-Serve
Cup and twist lid clockwise until firmly
sealed. For storing ingredients in the
cup, use only the Spout Lid to cover.
ninjakitchen.com
15