Assembly And Use For The Single Serve Cup - Ninja BL770 series Owner's Manual

Assembly and Use for the Single Serve Cup

ASSEMBLY
Fig. 2
Fig. 1
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Add ingredients to the single serve cup.
3
Place the single serve blade onto the cup and screw it
tightly until you have a good seal. (Fig. 1)
4
Turn the single serve cup upside down and place it onto
the motor base, aligning the tabs on the cup with the motor
base. Turn the single serve cup clockwise. (Fig. 2) Turn
the power button on, the single serve button will illuminate.
5
Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
USE
Fig. 3
For best results, use short "PULSES"... Practice makes perfect!!
Fig. 4
6
Once you have reached your desired consistency, turn
the power button off. Turn the single serve cup counter
clockwise and pull straight up to remove. (Fig. 4, Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
7
Turn the cup upright and remove the single serve blade
by twisting the blade assembly clockwise.
8
Place the To-Go drinking lid onto the single serve drink
cup, twist to seal and enjoy!
9
Make sure that the motor base is unplugged when not
in use.
REMOVAL
Fig. 5
10