Ihse Draco Series Keyboard Commands

Keyboard Commands for Draco Extenders
<Hot Key>, <h>, <w>, Write the device descriptions of the HID devices
<Enter> connected to the CON Unit into the CPU Unit.
Activating the emulation in the CPU Unit.
<Hot Key>, <h>, <e>,
Activate the emulation of HID device descriptions
<Enter> currently stored in the CPU Unit.
<Hot Key>, <h>, <d>, Deactivate the emulation of active device
<Enter> descriptions in the CPU Unit. The input devices
connected to the CON Unit will be now passed
transparently to the source (computer, CPU).
<Hot Key>, <h>, <r>, Deactivate the emulation of active device descrip-
<Enter> tions in the CPU Unit. Delete the descriptions out
of the CPU Unit. The input devices connected to
the CON Unit will be now passed transparently to
the source (computer, CPU).
Keyboard Commands for Draco Extenders
<Hot Key>, <a> Transmission of EDID information from the mo-
nitor connected to the CON Unit into the CPU
Unit.
<Hot Key>, <v>, <Enter> DVI-I extender:
Open VGA converter's OSD.
<Hot Key>, <l>, <Enter> CON Unit with local CPU:
Switch extender to local CPU.
<Hot Key>, <k>, <1>, CON Unit with local input or redundant KVM
<Enter> ports: Switch extender to 1st KVM link.
<Hot Key>, <k>, <2>, CON Unit with redundant KVM ports:
<Enter> Switch extender to 2nd KVM link.