Table of Contents
Advertisement
PRECAUTIONS, RESTRICTIONS AND WARNINGS
Recommendations for preserving the equipment
Your equipment has been designed and developed according to the standards of modern techology.
Similarly to other kinds of equipment, it requires special care, which is many times neglected due
to several reasons and circunstances. Therefore, here are some important reminders for your daily
routine. Try to follow these simple rules, which will save you a lot of time and will avoid unnecessary
expenses once they start making part of your working procedure.
Transportation, storage and operation
This equipment must be transported and stored observing the following directions:
- Avoid falls and impacts;
- Keep it dry, do not expose it to rain, water drops or wet floor;
- Keep it away from water and direct sunlight, and in it original wrapping;
- Don't move it over irregular surfaces, protect it from rain and observe the maximum stack quantity
specified in the packaging;
Environmental condition for transportation or storage:
- Room temperature range for transportation or storage -29ºC to +60ºC.
- Relative humidity range for transportation or storage 20% to 90%.
- Atmospheric pressure range 500hPa to 1060 hPa (375 mmHg to 795 mmHg).
Environmental operation condition:
- Room temperature range for functioning +10ºC to +40ºC.
- Recommended room temperature range +21ºC to +26ºC.
- Relative humidity range for functioning 30% to 75%.
- Atmospheric pressure range 700 hPa to 1060 hPa (525 mmHg to 795 mmHg).
- Operation altitude: ≤2000m.
Attention
The Equipment maintains its condition of safety and efficacy, provided that it is maintained (stored)
as mentioned in this instruction of use. Thus, the equipment will not lose or alter its physical and
dimensional features.
Sensibility to predictable environmental conditions in regular use conditions
- The equipment has been planned not to be sensitive to interference such as magnetic fields,
external electrical factors, electrostatic discharge, pressure or variance of pressure, provided that
the equipment is installed, maintained, clean, preserved, transported and operated as per this
instruction for use.
Precaution and warnings "during the installation" of the equipment
- Make sure that the voltage of the equipment is in accordance with the local network (127 or 220V).
- Position the equipment in a place where it will not get wet.
- Install the equipment in a place where it will not be damaged by pressure, temperature, humidity,
direct sunlight, dust, salts, or sulfur compounds.
- The unit should not be submitted to inclination, excessive vibrations, or blows (including during
transportation and handling).
- This equipment was not planned for use in an environment where vapors, anesthetic mixtures infl
ammable with air, or oxygen and nitrous oxide can be detected.
- Before the first use and/or after long interruptions from work such as vacations, clean and disinfect
the equipment.
20
Advertisement
Table of Contents
