Advanced Cleaning - SAEVO BIO FREE 6L Owner's Manual

EQUIPMENT OPERATION
Cleaning methods:
1. Place the object inside a container. Add the proper fluid to submerge the object.
2. Place the container directly into the tank. Add water to a level between MIN and MAX, without
covering the container.
3. Press the TIME button to set the clock to 10 minutes. Press the On/Off button once to start
cleaning. The ultrasonic waves will penetrate the container and clean the object.
Choose the container:
1. Plastic packaging - plastics are soft, and absorb about 30% of ultrasonic energy reducing the
effect of ultrasonic cleaning.
2. Aluminum containers - absorb about 20% of ultrasonic energy.
3. Stainless steel containers - absorb about 8% of ultrasonic energy.
3

Advanced cleaning

5. When it stops, open the drain valve to release the dirty water. Close the valve later.
6. Clean the tank and replace the water. Wash objects for more 3 minutes to remove residual debris
and detergent.
Debris accumulated over a long period of time, very dirty
or greasy objects.
Appropriate places: Automotive repair and hardware
manufacturers stores.
Cleaning methods:
1. Large objects can be placed directly into the tank. Small
objects can be placed in the basket and then into the tank.
Do not place objects on each other, to avoid friction during
cleaning.
2. Add water to a level between MIN and MAX and above
the objects.
3. Turn the main switch on. Press the TEMP button to set
the temperature of the water to 45ºC.
Press TC to turn on the heater,
The LED display shows the actual temperature of water.
When the water reaches the set temperature,
off indicating that the device is off.
4. Press the TIME button to set the clock to 10 minutes.
Press the On/Off button once to start cleaning. The fat
will be dissipated and appears to be something as a black
smoke on the water.
15
it flashes. Close the lid.
it turns