Equipment Operation; Control Panel And Operations - SAEVO BIO FREE 6L Owner's Manual

EQUIPMENT OPERATION

Control panel and operations

1. Indicator light – Working status
Green - Normal operating status, ready for use.
Red - Under the protection of overheating, it takes 15 minutes of waiting for the light changes from
red to green. The operation can be resumed later.
2. On/Off button – on/off switch on the unit
After turning on, the LED display, with standard time
normal operating status.
Press the On/Off button once to start the operation of the machine. Cleaning stops when the
countdown stops
On/Off button.
3. Function button - Functions (Degassing/Normal)
Press the Function Button (03),
selected. Press the On/Off button to start the degassing function
minutes, then the unit will return to the normal cleaning function (05). Pressing the On/Off button
before the end will cause the degassing to be interrupted. If you need additional degassing, press
the Function Button again (03),
Degassing
The newly added water can generate many air bubbles on the walls of the tank. This circumstance
reduces the effect of cleaning in the early phase of the ultrasonic cleaning.
Turning on the degassing function dissipates the droplets and bubbles of air, improving the efficiency
of cleaning (approximate time, 2 minutes).
4. Degassing status
Illuminated , the degassing function is selected.
. If the device needs to be stopped before the time runs out, press the
, it lights up, indicating that the degassing function has been
.
, and the unit will be ready and with
— Blinking, the degassing is in progress.
12
. It illuminates for about 2