JVC HR-S9600EK Instructions Manual page 13

N O TES:
● Refer to the SH U TTLE ring illustration above as you read the
following procedures.
● Reverse playback is possible only with a tape recorded in SP
mode.
Still Picture/ Fra me-By-Fra me
Pla yba ck
P AUSE DURIN G PLAYBACK
1
Press PAU SE.
● During still picture, the sound from the previous
3 seconds (approx.) will be played back repeatedly
(provided there was at least 6 seconds of normal
playback prior to engaging the still picture mode).
● "TIME SCAN AUDIO" must be set to "ON", or the
sound will not be heard. (
ACTIVATE FRAME-BY-FRAME
PLAYBACK
2
Turn the JO G dial to the right for forward frame-by-
frame playback, or to the left for reverse frame-by-frame
playback.
O R
Press PAU SE .
O R
Press or .
@ #
To resume normal playback, press PLAY .
ATTEN TIO N
● The operations by
TimeScan ( pg. 26).
● In the high-speed search, still, slow-motion or frame-by-
frame playback mode,
the picture will be distorted.
●
noise bars will appear.
●
there will be a loss of colour with a tape recorded in LP
●
mode.
● Picture may not appear during high-speed search with a
tape recorded in LP mode.
● When normal playback resumes from search, still, slow
motion or frame-by-frame playback, the picture may
jitter vertically momentarily depending on the type of TV
being used.
Downloaded from: https://www.usersmanualguide.com/
Still
8
pg. 27)
JO G dial/ SHUTTLE ring do not include
Slow M otion
ACTIVATE SLO W -MO TIO N
PLAYBACK
1
During playback or still, turn the SH U TTLE ring to the
right for forward slow motion, or to the left for reverse
slow motion (refer to the illustration to the left).
O R
During still picture, press and hold PAU SE for 2
seconds, then release. Press and release again to return
to still picture.
O R
During still picture, press and hold
return to still picture.
To resume normal playback, press PLAY .
N O TE:
For Time J og, see page 27.
High-Speed (Turbo) Sea rch
ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, turn the SH U TTLE ring all the
way to the right for forward high-speed search, or to
the left for reverse high-speed search. Releasing
SH U TTLE resumes still picture playback.
O R
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY .
N O TE:
For short searches, press and hold FF or REW during playback or
still picture. When released, normal playback resumes.
Va ria ble-Speed Sea rch
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback or still, turn the SH U TTLE ring to the
right for forward variable-speed search, or to the left for
reverse variable-speed search (refer to the illustration
above).
To resume normal playback, press PLAY .
N O TE:
Variable-speed search with TimeScan (
by pressing the remote control's
13
@ or # . Release to
pg. 26) can be used
or button.
@ #