George Foreman GFGBBQ3B-N Manual page 10

Attaching the Supports
Attaching the Wheels
BBQ ASSEMBLY
1. Hold the Back Support (8) in position
by placing 4 of the M5 55mm bolts (A)
through the pilot holes in the back legs
2. Attach the bent end of the side
supports (9) onto the M5 bolts that
have been passed through the back
legs and secure using 4 of the M5 Nuts
(C).
3. Secure the front end of the side
supports to the front legs using 4 of
the M5 55mm bolts (A) and 4 of the
M5 Nuts (C)
1. Pass the Wheel Axel (10) through the
holes in the left hand legs.
2. For both wheels, place a Bushing (E)
over the axle between the leg and the
wheel and slide the axle through the
wheel. Then secure in place using the
Pin Clip (D).
3. Attach leg caps (12)
10