Power Indicator - Panasonic PT-AE300E Operating Instructions Manual

Switching the projector on/off

Power indicator

Power indicator informs you the status of the power.
When the TEMP indicator is flashing, the power
indicator will not light.
Indicator status
No illumination or flashing
Red
Green
Orange
NOTE:
• See "TEMP indicator" on page 45.
• While the projector is cooling the lamp, do not switch the MAIN POWER button off or unplug the mains lead.
• The electric consumption in standby mode is 0.08 W.
E
20 - NGLISH
The MAIN POWER button is switched off.
Lit The MAIN POWER button is switched on and the projector is in standby mode.
Flashing The power button is switched on and the projector is getting ready to project.
Lit Projecting.
Lit The power button is switched off and the projector is cooling the lamp.
The power button is switched on again when cooling the lamp and recovering to
Flashing
projection mode. Recovery may take a while.
Power indicator
Status