Panasonic PT-AE300E Operating Instructions Manual page 25

Adjustment example
Project a commercial test signal for picture
adjustment on the screen and press the
WAVEFORM button.
100%
50%
0%
ENTER
ENTER
Adjust to 100%
100%
50%
0%
Adjust to 0%
Monitor position
With COMPUTER (except 1080) or
HDMI (Expand)
Adjust to 100%
100%
50%
0%
Adjust to 0%
Adjusting with luminance options
1. Press the ENTER button several times to display
FULL SCAN(Y)/SINGLE LINE SCAN(Y).
In SINGLE LINE SCAN mode, select the required
adjusting point by pressing F G.
2. Press the PICTURE ADJUSTMENT button and
display the BRIGHTNESS by pressing
When ADVANCED MENU is displayed, press the
button again to switch to the PICTURE menu.
Image
displayable area
Image
displayable area
Monitor position
.
F G
Remote control operation
3. Adjust by pressing I H.
Adjust the bottom line of the waveform to 0 % (0 or
7.5 IRE).
Setting range: -32 to +32
4. Press to display the CONTRAST.
F G
5. Adjust by pressing I H.
Adjust the up line of the waveform to 100 %
(100 IRE).
Setting range: -64 to +64
FULL SCAN(Y)/SINGLE LINE SCAN(Y)
Adjust the bottom line of the
BRIGHTNESS
waveform to 0 % (0 or 7.5 IRE)
Adjust the top line of the waveform to
CONTRAST
100 % (100 IRE)
Adjusting with RGB options
1. Press the ENTER button several times to display
the required R/G/B waveform option.
In SINGLE LINE SCAN mode, select the required
adjusting point by pressing F G.
2. Press the PICTURE ADJUSTMENT button and
display the BRIGHTNESS R/BRIGHTNESS G/
BRIGHTNESS B by pressing
When PICTURE menu is displayed, press the button
again to switch to the ADVANCED MENU.
3. Adjust by pressing I H.
Adjust the bottom line of the waveform to 0 % (0 or
7.5 IRE).
Setting range: -16 to +16
4. Press to display the CONTRAST R/
F G
CONTRAST G/CONTRAST B.
5. Adjust by pressing I H.
Adjust the up line of the waveform to 100 %
(100 IRE).
Setting range: -32 to +32
FULL SCAN(R)/SINGLE LINE SCAN(R)
Adjust the bottom line of the
BRIGHTNESS R
waveform to 0 % (0 or 7.5 IRE)
Adjust the top line of the waveform to
CONTRAST R
100 % (100 IRE)
FULL SCAN(G)/SINGLE LINE SCAN(G)
Adjust the bottom line of the
BRIGHTNESS G
waveform to 0 % (0 or 7.5 IRE)
Adjust the top line of the waveform to
CONTRAST G
100 % (100 IRE)
FULL SCAN(B)/SINGLE LINE SCAN(B)
Adjust the bottom line of the
BRIGHTNESS B
waveform to 0 % (0 or 7.5 IRE)
Adjust the top line of the waveform to
CONTRAST B
100 % (100 IRE)
.
F G
E
NGLISH - 25