Lens Memory Edit; H-Area Position; V-Area Position - Panasonic PT-AE300E Operating Instructions Manual

LENS MEMORY EDIT

You can edit named lens memory settings.
Deleting a memory setting
1. Select LENS MEMORY DELETE and press the
ENTER button.
2. Select the required lens memory setting and press
the ENTER button.
3. If you select ALL DELETE, you can delete all of
the saved lens memory settings.
4. Select OK in the confirmation screen and press the
ENTER button.
Changing the name of the memory
setting
1. Select LENS MEMORY NAME CHANGE and
press the ENTER button.
2. Select the required lens memory setting and press
the ENTER button.
3. Rename the lens memory setting.
Use F G I H to specify the location of the required
character to enter and press the ENTER button.
4. Repeat step 2 until you finish the text line.
You can enter up to 16 characters.
Move the cursor to ALL DELETE and press the
ENTER button to delete all the entered text line.
Press the DEFAULT button to delete the last entered
character or indicted with the cursor in the text box.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press G then perform step 2.
5. Select OK and press the ENTER button to set the
entered text as a name.
NOTE:
• The option that contains no saved adjustment will not
be displayed
• If you leave the text box empty and save, the default
memory name will stay as a name.
NOTE:
• The saved lens memory adjustment accuracy is not guaranteed.
• If the memorised ZOOM/FOCUS adjustment is not accurate enough, adjust the ZOOM/FOCUS menu again.
• If the power supply is stopped while loading or saving the lens memory, saved adjusted settings may differ from the
original after restart the projector. Adjust the ZOOM/FOCUS menu again.
• When the lens is shifted vertically more than 50 %, LENS MEMORY SAVE will not save the lens position correctly. See
"Lens shift and positioning" on page 16.
• When the lens is shifted horizontally and lens memory loaded, the image will be displayed with off-centred.

H-AREA POSITION

You can move the frame area horizontally, such as
aligning the right or left frame edge to the screen edge.
Press I H to move the frame.

V-AREA POSITION

You can move the frame area vertically, such as aligning
the up or bottom frame edge to the screen edge. Press
I H to move the frame.
LENS CONTROL
E
NGLISH - 41