Setting Your Own Colour Profile - Panasonic PT-AE300E Operating Instructions Manual

Remote control operation

Setting your own colour profile

You can adjust a selected colour individually
and save and retrieve under the PICTURE
MODE setting. Press the
COLOUR MANAGEMENT button to open the
menu. See "COLOUR MANAGEMENT" on
page 35.
PROFILE
CURSOR
LOG
PROFILE SAVE
PROFILE DELETE
PROFILE NAME CHANGE
Create a new profile
Adjusting the selected colour
Select a colour and adjust COLOUR, TINT and
BRIGHTNESS.
1. Select the CURSOR menu and press ENTER.
The projected image is captured, and the target
cursor is displayed.
When the LOG is fully stored, the target cursor will
not be displayed.
Target cursor
2. Move the cursor with F G I H to the required
place to select a colour and press ENTER.
The colour at the centre of the target cursor is
sampled and the sample box is displayed on the left
of the cursor. The menu items are displayed on the
upper part of the screen.
You may fail to adjust when the very edge point of
the projection area is selected as sample.
CURSOR
SELECT
DEFAULT
Sampled colour
E
26 - NGLISH
NORMAL
RETURN
COLOUR
TINT
ENTER
BRIGHTNESS
3. Select a menu item and the I H to adjust each
item level.
The result box is displayed on the right of the cursor
and shows the adjusted colour.
CURSOR
RETURN
COLOUR
TINT
SELECT
ENTER
BRIGHTNESS
DEFAULT
Adjust the vividness of the colour.
COLOUR
Setting range: -30 to +30
Adjust the colour tone.
TINT
Setting range: -30 to +30
Adjust the brightness of the colour.
BRIGHTNESS
Setting range: -20 to +20
4. Press ENTER to store the adjusted result.
"PROCESSING" is displayed for a few seconds and
the result is stored in LOG.
You can store up to 8 logs under LOG for each
PICTURE MODE setting.
5. Press MENU or RETURN to return to the previous
menu.
Repeat the steps above to store more adjustment.
Managing stored logs
You can edit or delete the stored logs of the
selected PICTURE MODE.
1. Select LOG and press ENTER.
The LOG menu is displayed.
PICTURE MODE : CINEMA1
POINT1
POINT2
POINT3
POINT4
POINT5
POINT6
POINT7
POINT8
ALL DELETE
Sampled colour
2. Select the required log from 1 - 8 or ALL DELETE,
and press ENTER.
Select CHANGE to edit the log.
The cursor menu is displayed and you can readjust
the colour.
Select DELETE to delete the log.
The confirmation screen will be displayed. Select OK
to delete.
When you select ALL DELETE, the "DELETE ALL
LOG." screen is displayed. Select OK to delete all
logs. The PROFILE setting will be set to NORMAL.
Adjusted colour
Adjusted colour