Table of Contents
Advertisement
w Engage the attachment mounting screw of
the camera with the camera mounting hole
of the attachment plate and rotate the
camera in the direction of the arrow to the
"LOCK" position to secure the camera to
the attachment plate without any backlash.
e Connect the power cord and the video
output cable at the side of the mounting
base. (☞ page 19)
Apply waterproof treatment to the con-
nected section. (☞ page 21)
r Accommodate
inside the cable guide of the mounting
base.
Important:
• To prevent the cables from being caught
when the cover is attached, keep the
cables inside the cable guide.
the
connected
cables
Projections
Cable guide
Connected cable
Make cable
connections.
Cable guide
25
Advertisement
Table of Contents
