Table of Contents
Advertisement
Connection/
Speed LED
Link/Activity LED
LAN Port
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
2.5GbE LAN LED:
State
Description
Yellow On
1 Gbps, 100Mbps data rate
Green On
2.5 Gbps data rate
Off
10 Mbps data rate
10/100/1000 LAN LED:
State
Description
Yellow On
1 Gbps data rate
Green On
100 Mbps data rate
Off
10 Mbps data rate
ID Button / LED:
State
Description
Blue on System identification is active
Off
System identification is disable
Hardware Installation
- 17 -
Advertisement
Table of Contents
