Back Panel Connectors - Gigabyte MW53-HP0 User Manual

1-6

Back Panel Connectors

1
1
ID Button with LED
When the system identification is active, the ID LED on the front/ back panel glows blue.
2
Serial Port
Connect to serial-based mouse or data processing devices.
3
VGA Port
Connect to a monitor device.
4
2.5GbE LAN Port #2
The Gigabit Ethernet LAN port provides Internet connection at up to 2.5 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
5
USB 3.2 Type-A Port
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
6
USB 3.2 Type-C Port
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
7 2.5GbE LAN Port #1
The Gigabit Ethernet LAN port provides Internet connection at up to 2.5 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
8
USB 3.2 Gen2 Ports
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
Server Management 10/100/1000 LAN Port
9
The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is
the dedicated LAN port for Server Management.
10
USB 3.2 Gen2 Ports
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
11
Line In Jack (Blue)
The default Line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc
Line Out Jack (Green)
12
The default Line Out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be
used to connect front speakers in a 4/5.1/7.1-channel audio configuration.
13
Mic In (Pink)
The default MIC In jack. A microphone can be connected to the MIC In jack.
2
3
Hardware Installation
4
7
5
8
6
- 16 -
9
11
12
10
13