Table of Contents
Advertisement
EDITING
Edit From A
Camcorder
Recorder
VIDEO
AUDIO input
input
Audio cable (not provided)
Video cable (not provided)
VIDEO OUT
Camcorder
AUDIO OUT
EDIT
Player
To rear panel
PAUSE connector
Mini-plug cable
(not provided)
(JVC camcorder
only)
You can use a camcorder as the source player and your
recorder as the recording deck.
A
Make connections.
Connect the camcorder's AUDIO/VIDEO OUT
connectors to the recorder's front panel AUDIO/VIDEO
input connectors.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
● When a Master Edit Control-equipped JVC camcorder is used,
the camcorder is capable of controlling the recorder. Refer to
the camcorder's instruction manual for operating procedure.
B
Set the recorder's input mode.
Press AUX (number key "0") and/or PR to select "F-1".
C
Set the edit mode.
See "PICTURE CONTROL" on page 61.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select "EDIT" to dub tapes in step 3, be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
47
EN
Advertisement
Table of Contents
