JVC HR-J880EK Instructions Manual page 16

16
EN
Setting satellite receiver's brand and
channel
After installation, set the satellite receiver's brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
Turn on the TV and select the video channel (or AV
mode).
A
Turn on the satellite receiver.
Turn on the satellite receiver's power.
B
Access the Main Menu screen on the
recorder.
Press MENU.
SAT CONTROL SET (cont.)
C
Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to "INITIAL
SET", then press OK or e
D
Access the Sat Control Set screen.
Press rt to move the
highlight bar (pointer) to
"SAT CONTROL SET", then
press OK or e .
E
Enter the satellite receiver's brand.
Press the appropriate number
keys to enter the brand code
from the list on page 17, then
press OK.
● If the brand code you entered
is invalid, the code field will
be reset. Enter the correct
brand code again.
● If the recorder is in playback or
recording mode, you cannot
set the brand code.
F
Select the satellite receiver's channel for
testing.
Press the appropriate number
keys to enter one of the
channel positions on the
satellite receiver, then press
OK.
● You can select the channel
position between 1 to 999.
● After pressing OK, the recorder
enters the Test mode.
.