H3C F1000-AI-20 Manual page 24

Figure2-24 Connecting an AC power cord for an F1000-AI-03 or F1000-AI-10 firewall
Connecting an AC power cord for an F1000-AI-20, F1000-AI-30, or F1000-AI-50 firewall
1. Connect the connector of the AC power cord to the target AC power receptacle on the rear
panel of the chassis. Then use a power cord retainer clip (see Figure2-25) or a releasable cable
tie (see Figure2-26) to secure the power cord.
2. Connect the other end of the power cord to an AC power source.
Figure2-25 Connecting an AC power cord (using a power cord retainer clip to secure the
power cord)
Figure2-26 Connecting an AC power cord (using a releasable cable tie to secure the power
cord)
Connecting an AC power cord for an F1000-AI-60, F1000-AI-70, F1000-AI-80, or F1000-AI-90
firewall
1. Connect the female connector of the AC power cord to the AC-input power receptacle on the
power supply.
2. Use a releasable cable tie to secure the AC power cord to the power supply handle.
3. Connect the other end of the power cord to an AC power source.
1
1
1
2
2
22
2