JVC GR-DVL910A Instructions Manual page 73

SYMPTOM
9. The colour of Snapshot looks
strange.
10. The image taken using
Snapshot is too dark.
11. The image taken using
Snapshot is too bright.
12. Digital Zoom does not work.
13. The Black & White Fader
does not work.
14. The Dissolve function does
not work.
15. The Picture Wipe and
Dissolve functions do not
work.
Downloaded from:
9. • The light source or the subject
• The Sepia or Monotone mode
10. • Shooting was performed
11. • The subject is too bright.
12. • 10X optical zoom is selected.
• "PROGRAM AE" is set to
• Picture Wipe or Dissolve are
13. • The Sepia or Monotone mode
14. • The Sepia, Monotone or Slow
• "WIDE MODE" is set to
• The previously selected mode
15. • The last selected editing scene
• At the end of the last selected
• The power is off.
https://www.usersmanualguide.com/
POSSIBLE CAUSES
does not include white. Or
there are various different
light sources behind the
subject.
is activated.
under backlit conditions.
"VIDEO ECHO" in the Menu
Screen.
being used in a scene
transition.
is activated.
Shutter mode of Programme
AE with special effects is
activated.
"SQUEEZE" in the Menu
Screen.
of Programme AE with special
effects was changed after the
last selected scene for editing
was registered.
is ending.
scene for editing, the Power
Switch was set to "OFF".
CORRECTIVE ACTION
9. • Find a white subject and
compose your shot so that it
also appears in the frame
( pg. 26, 42).
• Turn off Sepia and Monotone
( pg. 38, 39).
10. • Press the BACKLIGHT Button
( pg. 44).
11. • Set "PROGRAM AE" to
"SPOTLIGHT" in the Menu
Screen ( pg. 38).
12. • Set "ZOOM" to "40X" or
"600X" (
GR-DVL313A
(
GR-DVL910A/DVL510A/
DVL450A/DVL310A/DVL210A/
DVL910EA/DVL510EA/
) in the Menu
DVL210EA
Screen ( pg. 47).
• Disengage the "VIDEO
ECHO" mode ( pg. 18, 39).
• Wait until the Picture Wipe or
Dissolve effects are completed
( pg. 18, 40).
13. • Turn off Sepia and Monotone
( pg. 38, 40).
14. • Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene transition
( pg. 38, 40).
• Set "WIDE MODE" to
"CINEMA" or "OFF" mode
( pg. 48).
• Make sure you have selected
the mode of Programme AE
with special effects you want
before starting editing (
38, 40).
15. • Select Picture Wipe or
Dissolve before beginning
recording. The effects are then
automatically activated
( pg. 40).
• Do not turn off the
camcorder's power after
setting Edit-In and Edit-Out
points, as they will all be
erased ( pg. 40).
• The camcorder automatically
shuts off after 5 minutes have
elapsed in the Record-
Standby mode. Make sure you
continue operations within
5 minutes after engaging
Record-Standby mode
( pg. 40).
CONTINUED ON NEXT PAGE
73
EN
)/"500X"
pg.