Using The Remote Control Unit; Installing The Batteries - JVC GR-DVL910A Instructions Manual

USING THE REMOTE CONTROL UNIT

2
Remote sensor
Downloaded from:
1
3
Tab
+
–
–
+
Transmitted beam
effective area
5 m
30°
https://www.usersmanualguide.com/
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible.

Installing The Batteries

The remote control uses two "AAA (R03)" size
batteries. See "General Battery Precautions"
( pg. 85).
1
Remove the battery compartment cover while
pushing up the tab as illustrated.
2
Insert two "AAA (R03)" size batteries in the
correct direction.
3
Re-attach the battery compartment cover.
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or when
the remote sensor is directly exposed to sunlight
or powerful lighting.
30°
57
EN