Configuring Wft Server Communication Settings - Canon WFT-E7 Ver.2 Instruction Manual

Configuring WFT Server Communication Settings

These instructions are continued from Chapter 1.
Setting up an Account
Enter a login name and password to access the camera from a computer. The login name and
password you specify here are used on the computer when connecting to the camera.
54
Press <0> and turn the <5> dial to select the
set number, and then press <0>.
Press <0> again. After the connection wizard
closes, the display will return to the menu screen.
The <LAN> lamp on the transmitter lights up in
green.
Settings information is stored on the camera. It is
not stored on the transmitter.
Turn the <5> dial to select [Set up], and then
1
press <0>.
Turn the <5> dial to select [WFT server
2
settings], and then press <0>.