Synchronizing The Time - Canon WFT-E7 Ver.2 Instruction Manual

Synchronizing the Time

Steps 1–5 are the same on master and slave cameras.
In the menu, select [Communication
1
settings].
Select [Network settings].
2
Set [Communication mode] to
3
[Disconnect].
Once [Communication mode] is set to
[Disconnect], you can select [Sync time between
cameras].
Select [Sync time between cameras].
4
Select [OK] on the next screen displayed, shown
below.
Select [LAN Type].
5
After selecting [Wireless] or [Wired], select [OK].
91