Canon WFT-E7 Ver.2 Instruction Manual page 24

Using the Wizard to Establish a Connection
Entering the Wireless LAN Encryption Key
Enter the encryption key set for the wireless LAN terminal. For details on the encryption key,
refer to the device's instruction manual.
Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and
encryption of the wireless LAN terminal.
24
The [Key index] screen is displayed only if WEP
1
encryption is used by the wireless LAN terminal.
Turn the <5> dial to select the key index number
specified as the access point, and then press
<0>.
Select [OK] and press <0> to go to the next
screen.
Turn the <5> dial to select the key format, and
2
then press <0>.
Select [OK] and press <0> to go to the next
screen.
Enter the encryption key.
3
To switch between input areas, press the <Q>
button.
To move the cursor, turn the <5> dial.
In the bottom input area, turn the <5> dial and
press <0> to enter the encryption key.
If you make a mistake, press the <L> button to
erase it.
When you press the <7> button to complete
the connection with the wireless LAN terminal, the
[Network] screen (p.27) is displayed.
To return to the screen in step 2, press the
<6> button. The entry is canceled.