Creating The Wft-E1 Settings File - Canon WFT-E1 Network Setup Manual

Creating the WFT-E1 Settings File

Use the WFT-E1 Utility software included in the package to create the settings file to
transfer images using infrastructure mode.
Start WFT-E1 Utility.exe and set up as follows. If the WFT-E1 Settings Wizard appears,
click the [Cancel] button.
Setting Up TCP/IP
If the wireless LAN access point, etc., is set to disable the DHCP server function
in "Setting the IP Address" on the previous page, enter the IP address among
the allocated IP address in a range that is not duplicated with the FTP server or
other network equipment.
Enter the subnet mask the same way as for the wireless LAN access point.
If the wireless LAN access point, etc., is set to enable the DHCP server function
in "Setting the IP Address" on the previous page, check [ Obtain an IP
address automatically].
W
2
21