Configuring Wft Server Communication Settings - Canon Wireless File Transmitter WFT-E2 II A Instruction Manual

Configuring WFT Server Communication Settings

These instructions are continued from Chapter 1.
Setting up an Account
Enter a logon name and password for accessing the camera from a computer. The logon name
and password you specify here are used on the computer when connecting to the camera.
42
Press <0>. Turn the <5> dial to select the set
number, and then press <0>.
Press <0> again. After the connection wizard is
closed, the display reverts to the menu screen.
The <LAN> lamp on the transmitter is lit in green.
Settings information is stored on the camera. It is
not stored on the transmitter.
Turn the <5> dial to select [Set up], and then
1
press <0>.
Turn the <5> dial to select [WFT account], and
2
then press <0>.
Select a user number.
3
With WFT Server, you can connect the camera to
up to three computers. Here, select a user number
to prevent conflicts when users at other computers
are connected to the transmitter simultaneously.
Turn the <5> dial to select [User *], and then
press <0>.