Table of Contents
Advertisement
Configuring EOS Utility Communication Settings
Start the pairing software.
4
Normally, it is installed in the same location as
EOS Utility.
When the pairing software starts up, an icon is
displayed in the task bar.
When the camera is detected, a message is
displayed.
Click the pairing software icon.
5
Detected cameras are listed. If a camera is
already connected, it is not displayed in the list.
Select the camera to connect to and
6
click [Connect].
If multiple cameras are displayed, identify the
camera to connect to by its [MAC address] or [IP
address].
You can check the [MAC address] and [IP
address] by accessing [Confirm settings] in the
menu (p.84).
49
Advertisement
Table of Contents
