Configure The Settings Relating To Sub Monitors [Sub Monitor] - Panasonic WJ-NV300K/GJ Operating Instructions Manual

Network disk recorder
Table of Contents

Advertisement

Configure the settings relating to sub monitors [Sub monitor]

Set up the sub monitor by selecting the camera images to display, the image display duration, etc.
■ Display settings
Set the display sequence for camera images (image
switching).
[Mode]
Select how to display images from the cameras.
1-screen live sequence: Images from the cameras
will sequentially be switched and displayed on
1-screen.
4-screen live sequence: Images from the cameras
will sequentially be switched and displayed on
4-screen.
9-screen live sequence: Images from the cameras
will sequentially be swiitched and displayed on
9-screen.
Switch by alarm terminal input: Switches camera
1 to 9 to display images on 1-screen accord-
ing to the signal input triggered by the terminal
alarms from terminal 1 to 9.
16Screen: Images from the cameras will be dis-
played on16-screen without switching the
screen.
[Duration]
Set the interval (duration) for switching camera
images.
3 s/ 5 s/ 10 s
Default: 5 s
Note:
The terminal status (N.O. or N.C.) for supplying an
alarm signal to the alarm terminal depends on the
settings for "Terminal input" of "Advanced termi-
nal alarm setup" (☞ page 45).
[Camera selection]
Select the cameras to be included in the sequence
display.
Mark the checkbox next to the desired camera. The
selected cameras will be displayed in numerical
order.
Note:
When "4-screen live sequence"
sequence" or "16Screen" is selected for "Mode",
images from the first 4, 9 or 16 selected cameras
will be displayed regardless of the order of the
camera number.
[Secret view]
Secret view is a function that causes the camera
image displayed on a 1-screen or the selected cam-
era image on a multiscreen on the main monitor to be
displayed as a black screen on the sub monitor.
Determine whether or not to use secret view.
On: Enables the secret view function.
Off: Disables the secret view function.
Default: Off
Note:
While "1-screen live sequence" is being per-
formed, the secret view images will be skipped
(not displayed).
The image on the sub monitor may momentarily
go black when images are switched on the main
monitor.
50
, "9-screen live

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-nv300k/gWj-nv300k

Table of Contents